When it comes to DIY PC building, there are a hundred facts that you have to consider. Not everyone is invested in everything as long as build quality and the outlook is concerned. But there is one thing in common that bothers everyone. And that is- how does the PC casing look with everything else installed inside?
Regarding that, it had been an age-long trend of black/pitch black casings that gamers and graphics enthusiasts use to go with. But taking the recent trend into account, people are leaning more towards minimalistic and premium-looking white computer cases.
If we’re not wrong, that’s also what drove you to here in search of the best white PC cases you can buy. In today’s discussion, a number of priority factors were considered. Among them, the outlook, build material, number and size of fan to-be-installed, number of radiator slots, airflow design, ports, HD and SSD slots any more were there.
||1. NZXT H510 – CA-H510B-W1 – Compact ATX Case||
|2. Cooler Master MasterBox TD500 Mesh||
|3. Lian Li PC-O11DW 011 Gaming PC Case||
|4. Corsair iCUE 220T RGB Airflow Smart Case||
|5. EVGA DG-77 Alpine White Mid-Tower Case||
Top 5 Best White PC Cases – Expert’s Picks
We’ve come with 5 white PC cases that contain a piece of the pie for every PC builder out there. On top of that, we’ve blended a mix of both budget picks and premium ones. In case it had driven some interests you so far, let’s dive deeper-
#1 NZXT H510 – CA-H510B-W1 – Compact ATX Mid-Tower Case
- Side panel made of tempered glass.
- Has a Type-C port on the front I/O.
- Includes cable routing kit.
- Minimal footprint.
- Single-screw installation.
- Pretty budget-friendly.
If you’re in an obsession with clean, minimalistic and modern design, then why don’t embrace it in your gaming PC casing anyway? The H series from NZXT had exactly been into this stuff, and the first pick of our list is the H510 – CA-H510B-W1 from NZXT. Just to clarify, there are three more models within the H series, each sporting to be either from i-series or non i-series.
Anyways, the White H150 is a kind of standard model that meets many ends. Starting with the case design, both non-i-series and i-series versions are made to be stunning. There is a radiator mounting bracket that you can remove, several fan filters, flush tempered glass window, and many other amenities.
Managing the cables often happens to be the most irritating and time-consuming chore while setting up or customizing your CPU. But with the H510 – CA-H510B-W1, the issue had been put to an end. The cable routing kit and the cable channels will be pre-installed just to save the hassle for you. It has a port for connecting USB 3.1 gen-2 devices.
It’s a matter of utter surprise that all these features and inclusions had been managed to be within a very small casing footprint (only 16.85 x 8.27 x 18.11 inches). And that might be one of the best selling points of this CPU. In terms of budget, it’s a very easy pick for budget buyers who’re looking for premium features.
Although, it’s not got a handful of cooling fan housings or radiator slots, but that’s not what real budget buyers seek in a casing actually. Overall, in case you’re short with a budget to go for a luxurious one, go for the NZXT H510 and you’ll thank us later.
#2 Cooler Master MasterBox TD500 Mesh
- Three ARGB fans on the front.
- The side panel is made of crystalline tempered glass.
- Cool and aesthetic polygonal mesh.
- Has two 360mm radiator slots.
- Firm airflow with a fast cooling rate.
- Spacious casing interior.
The frontline impression of this casing from the Cooler master is the side panel made of Crystalline tempered glass. It doesn’t only resemble a precise crystalline design but also interacts with the component RGB lighting.
Talking about the RGB stuff, there are three of the fans that are with the RGB lighting effect on the very front surface. These pre-installed ARGB fans will ensure that the total system can enlighten up every intricate angle of the casing. Hence, the gaming mood will be immediately turned on once you press the power button.
You will find scopes to equip a total of 7 cooling fans of 120mm size to ensure maximum cooling around the inside of the CPU. To take the cooling performance even further, there are two 260mm radiators on the top and front panel, who’ll take over the duty of uniform heat transfer.
Around the three dimensional contours of this CPU, there is a polygonal-shaped mesh feature that takes the aesthetic level of your system to the next level. Also, this mesh can play roles in providing decent dust filtration and high airflow within the casing.
With all those features, fans and radiators installed, there is still much room inside the casing. For any standard ATX motherboard configuration along with graphics card, hard drive/solid-state drive, and CPU cooler, there will still be some space left.
The version of Cooler Master MasterBox TD500 that we’ve picked up for the discussion is the white one with a mesh. There are two more options as well as the first one being the black and meshed version, and the second one is black only(without mesh). You can choose from any of these three.
#3 Lian Li PC-O11DW 011 Gaming PC Case
- The frontal face is made of tempered glass and aluminum.
- Thick 0.8mm body.
- Comes with HDD and SSD expansion slots.
- Scopes to add up to 8 cooling fans.
- HD audio compatibility.
- Can house up to 420mm of VGA card length.
If you don’t put a leash on your budget for getting the coolest CPU casing among your friends, the Lian Li PC-O11DW 011 white full-tower pc case might be your lucky shot. It’s an ATX white mid tower case, which has been brought to the next level of build quality and design.
Let’s get the ball rolling with the frontal part. The front of this casing is made of a combination of aluminum and tempered glass. The side panel of this case is made of tempered glass only. As a combination, the tempered glass will take care of the durability issue, and the aluminum part will keep the weight department light besides ensuring a decent heat exchange rate.
A common question about ATX mid-tower casing is- how many cooling systems you can install in it? And it’s no different with this one as well. But the good part is, you can install 8 cooling fans all around the inside of the casing. You can install three 120mm fans or two 140mm fans on the top part. On the side, there is room for three 120mm fans. At the bottom part, there are three 120mm fan vents provided.
If there’d be a kind of cooling in the casing universe, the Lian Li PC-O11DW 011 Gaming PC Case would surely deserve the nomination. To keep it up with the cooling, there are three different radiator support slots as well. Within there, you can install either a 120 x 360mm radiator or other tow sized based on your system cooling requirements.
Among other connectivity options, you can use 1 USB 3.1 Type-C port, a couple of USB 3.0 ports, a VGA card of maximum 420mm length.
#4 Corsair iCUE 220T RGB Airflow Smart Case
- Steel made grilled frontal panels.
- Sports node controls for the RGB on the fans.
- Can connect up to 10 fans(both 120mm and 140mm).
- Can connect a 360mm radiator.
- Easy to remove front plate.
- RGB can be customized through Corsair iCUE software.
In case you are in search of a mid-tower smart case, Corsair definitely deserves to be in the list. Among a number of casings from their inventory, we’ve put our bet into the Corsair iCUE 220T, our fourth best white computer case. It’s neither a budget casing nor a high-end one. Instead, it seems more to be in the sweet spot of budget and luxury.
Upon the first impression on the casing, we found it to be quite optimal for keeping the airflow/cooling sound within it. The front panel contains a steel grill that intakes as much air as it needs. On the other hand, three SP120 RGB fans come with the casing itself. Each of these fans has 8 LED lights that can be addressable individually.
There are controls of lighting node cores that will let you control the RGB illumination to the depth in the package. With Corsair’s iCUE software, there is even more freedom for customization. Therefore, in case you want to customize the RGB lighting as per your own taste, the Corsair iCUE 220T will give you a full-on opportunity to do that.
Just as the regular standard is, the side panel is made of tempered glass through which you can visualize the components inside. The other parts(both inside and outside) are mainly made of solid steel construction. Also, don’t fall for the sweet and classic design of the front plate. While necessary, it can be a solid and sturdy one as well.
#5 EVGA DG-77 Alpine White Mid-Tower
- Tempered glass panels on three sides.
- The GPU can be mounted vertically.
- Stylish RGB branding with effects.
- Can house up to 4 SSD or HDD.
- Supports both 140mm or 120mm fans.
- Perfect for graphics and gaming enthusiasts.
DG-7 from EVGA had a famous lineup of mid tower casings among gamers and PC builders. The EVGA DG-77 Alpine White Mid-Tower is just another representative of the series, and we’re going to dive into the depth of this casing’s specs from now on.
For any gaming or graphics enthusiasts, the EVGA DG-77 Alpine White Mid-Tower is an ideal casing to go with. You can install a couple of 2.5 inches HDD or four 2.5 inches SSD storage in case you want to build a good system. In case you want, you can go with a combination of both of them as well.
There are fans in every gaming PC casing on the earth. But not all of them sport a fan filter. With the removable fan-filter, the electric components will be dust-free and will serve for a longer time for sure. In terms of cooling fans, the choices are flexible. You can either go with 120mm fans or 140mm fans- there will be room for both types in the EVGA DG-77 Alpine White Mid-Tower.
On three sides, there is a tempered glass, which is quite a unique feature. To make things more convenient and space-efficient, you can mount the GPU vertically to keep up with space. The cable management is made easier with the built-in cable manager, and hidden trays for the hard drive.
There are good RGB lighting features included in the fans, and that can be controlled via the control board. Even the logo ‘EVGA’ has an RGB effect to it, making things cooler and noticeable. Some of the gamers might mind the branding, but that’s fine from where we stand.
People Ask More: FAQ’s
It’s a clear conflict of choices to select between white and black PC casing. Black ones are conventional and more stealthy. On the other hand, choosing white casings is quite a trend as they look more premium and come for a good price-quality ratio.
NZXT h510 sports one of the best airflow among white casings that come for a budget. The streamlined cooling featuring a couple of 120mm fans ensures an optimal internal flow of air and prevents the creation of any “hotspot” inside the casing. You can also install a radiator of up to 240mm to take the cooling to the next level.
A number of fan colors can be suited for a white PC casing. Go for RED led fans with the cooler, while the rest of the fans will be blue. You can also use plain black fans for the cooler with red ones for the rest of the slots.
Thanks for your time that you took to go through the whole discussion on the best white PC cases around in the market of 2020. We’ve tried our best to pick up those and those casings only that provides a good return of the investment you’d make. That being said, here goes the wrap-up verdict of what we’ve discussed so far-
Going back to the top again, we think the NZXT H510 is the best value for the money as long as white PC cases are considered. In case you unleash your budget and want to go premium, our best will be the Lian Li PC-O11DW. Also, there are second and third choices in both wings as well. Take your time to reconsider and make a shortlist of your own.
A last piece of advice would be to keep up with your system’s specs and hardware requirements in mind. Because the casing itself determines many of the hardware factors (cooling system, SSD slots, ports, GPU dimension).